content loaded
RMS Output Power: 250W
RMS Output Power: 250W
Key Features
- Volume and balance allows for control at the component instead of volume control or keypad
- A/B speaker switching easily toggles output between two sets of speakers or zones
- Signal sensing inputs automatic turn on/off and switching to second source
Key Features
- Volume and balance allows for control at the component instead of volume control or keypad
- A/B speaker switching easily toggles output between two sets of speakers or zones
- Signal sensing inputs automatic turn on/off and switching to second source
Sign In for Dealer Pricing
Become an ADI CustomerKey Features
- Volume and balance allows for control at the component instead of volume control or keypad
- A/B speaker switching easily toggles output between two sets of speakers or zones
- Signal sensing inputs automatic turn on/off and switching to second source
Please sign in to view pricing and availability and to add to cart.
Recommended
EG1AVWN | ED-EG1AVWN
EG1AVWN | ED-EG1AVWN
Sign In for Dealer Pricing
KI-OSD | ED-KIOSD
KI-OSD | ED-KIOSD
Sign In for Dealer Pricing
KI-SB4 | ED-KISB4
KI-SB4 | ED-KISB4
Sign In for Dealer Pricing
Sale
PROSIXCTV | PROSIXCTV
PROSIXCTV | PROSIXCTV
Sign In for Dealer Pricing
Sale
PROSIXPIRV | PROSIXPIRV
PROSIXPIRV | PROSIXPIRV
Sign In for Dealer Pricing
Accessories
Overview
Specifications
Documents
Product Overview
The Russound P125 is a 2-channel dual source power amplifier with auto-source switching. It features Primary and Secondary audio line inputs with a loop out to another zone, receiver, or device from the secondary source. A speaker-level input can be connected and assigned as either the primary or secondary source. This amplifier can be used for power upgrades in zones for large speaker selector or volume control systems. The P125 is rated at 125 watts per channel into 4 ohms, and 80 watts into 8 ohms. With the Stereo/Bridge Mono switch in the Bridge Mono position, both amplifier channels are combined for a higher powered mono output. In Bridge mode the X125 is rated at 250 watts of power into a single 8 ohm load. The 12V Trigger In/Out allows the amplifier to be activated by other devices or to activate other electronics via a 3.5 mm mini phone plug cable, with 100mA current capability.
Main Features
- Volume and balance allows for control at the component instead of volume control or keypad
- A/B speaker switching easily toggles output between two sets of speakers or zones
- Signal sensing inputs automatic turn on/off and switching to second source
- Bridgeable - delivers higher output for use with a subwoofer or outdoor speakers
General Information
Name: Russound P125 2-Channel, 125W Dual Source Amplifier
Category: Russound, Residential AV, Residential Audio, Amplifiers
UPC Code: 612934536274
Country of Origin: China. Country of origin is subject to change.
Specifications
-
ADI Part Number RD-P125 Brand Name Russound Manufacturer Russound/FMP, Inc Manufacturer Part Number P125 Product Model P125 Product Name Dual Source Power Amplifier (80/125W) P125 Product Series P Product Type Amplifier weight 25.60 lb
-
Audio Channels 2 Impedance 4 ohmss
-
Maximum Frequency Response 20 kHz Minimum Frequency Response 20 Hz RMS Output Power 250W
-
Color Black Depth 13.8" Height 3.5" Width 16.5"
-
Input Voltage 115V AC
-
Length 13.8"
-
Country of Origin CN Environmentally Friendly Yes Indoor/Outdoor Outdoor