Altronix AL1012ACMCB220 Access Power Controller, 10A 12V DC P/S with ACM8CB, 220V
Altronix AL1012ACMCB220 Access Power Controller, 10A 12V DC P/S with ACM8CB, 220V
Altronix AL1012ACMCB220 Access Power Controller, 10A 12V DC P/S with ACM8CB, 220V
AL1012ACMCB220Â |Â AX-1012ACMC2
Please sign in to view pricing and availability and to add to cart.
Product Overview
AL1012ACMCB220 converts a nominal 220VAC 50/60Hz input into eight (8) independently controlled 12VDC Fail-Safe and/or Fail-Secure outputs with a total of 10 amp continuous supply current. Outputs are activated by an open collector sink or normally open (NO) dry trigger input from an Access Control System, Card Reader, Keypad, Push Button, PIR, etc. This unit will route power to a variety of access control hardware devices including Mag Locks, Electric Strikes, Magnetic Door Holders, etc. The outputs will operate in both Fail-Safe and/ or Fail-Secure modes. This unit is designed to be powered by one common power source (factory installed) which will provide power for both the board operation and locking devices, or two (2) totally independent power sources, one (1) providing power for board operation and the other for lock / accessory power. The FACP Interface enables Emergency Egress, Alarm Monitoring, or may be used to trigger other auxiliary devices. The fire alarm disconnect feature is individually selectable for any or all of the eight (8) outputs.
Main Features
- Fire Alarm disconnect input options: a) Normally open (NO) or normally closed (NC) dry contact input. b) Polarity reversal input from FACP signaling circuit.
- Visual Indicators: Red LEDs indicate outputs are triggered (relays energized) Green LED indicates FACP disconnect is triggered AC input and DC output LED indicators.
- Battery Backup: Built-in charger for sealed lead acid or gel type batteries Maximum charge current 0.7 A Automatic switch over to stand-by battery when AC fails Zero voltage drop when unit switches over to battery backup (AC failure condition) Battery fail and battery presence supervision (formin.C" contact).
General Information
Specifications
-
ADI Part Number AX-1012ACMC2 Brand Name Altronix Manufacturer Altronix Corporation Manufacturer Part Number AL1012ACMCB220 Product Model AL1012ACMCB220 Product Name AL1012ACMCB220 Power Supply Product Type Power Supply Â
-
Output Voltage 12V DC Â
-
Color Green, Red Depth 4.5" Form Factor Enclosure Height 15.5" Weight (Approximate) 10.70 lb Width 12" Â
-
Input Voltage 230V AC Number of +12V Rails 1 Output Current 10A Â
-
Compatibility Compatible Devices: Mag Locks Electric Strikes Magnetic Door Holders Â